Diseño y elaboración de bloques de hormigón prototipo utilizando partículas de caucho.
The problem in the disposal of rubber particles, creates a necessity to propose new alternatives to approach the mitigation of the environmental impact generated by the contamination of vehicular tires. In this sense, taking advantage of this recycled material is proposed for use in construct...
| Autor Principal: | Lara Guerrero, Edison Javier |
|---|---|
| Formato: | bachelorThesis |
| Idioma: | spa |
| Publicado: |
2018
|
| Materias: | |
| Acceso en línea: |
http://dspace.ups.edu.ec/handle/123456789/16054 |
| Etiquetas: |
Agregar Etiqueta
Sin Etiquetas, Sea el primero en etiquetar este registro!
|
| Sumario: |
The problem in the disposal of rubber
particles, creates a necessity to propose
new alternatives to approach the
mitigation of the environmental impact
generated by the contamination of
vehicular tires. In this sense, taking
advantage of this recycled material is
proposed for use in construction
materials. This investigation consists in
the design and elaboration of a prototype
concrete block using rubber particles, for
different percentages of substitutions by
fine aggregate that has similar technical
and economic characteristics of a
conventional type B concrete block,
complying with the NTE INEN 3066
2016-11 norm. The proposal, is the
replacement of percentages (10%, 15%
and 20%) in volume of fine aggregates by
rubber particles product of the crushing of
tire. The results show that the alternative
is viable under the parameters mentioned
above; therefore, the concrete block with
20% rubber particles showed a minimum
net compression strength of 3,69 MPa.
complying with the established. The price
of the prototype concrete block with 20%
rubber particles is cheaper than a
conventional block type B proposed in
this research. |
|---|