Influencia de las partículas de caucho en el desgaste de adoquines de hormigón.
This investigation was carried out to try to reduce and give good use to the slag produced by the retread processing of tires, said slag was used in the production of vehicular cobblestones. The main objective is to perform an analysis of the mechanical properties such as compressive strength...
| Autor Principal: | Caiza Escobar, Milton Javier |
|---|---|
| Otros Autores: | Chipugsi Carua, Rosa Angelica |
| Formato: | bachelorThesis |
| Idioma: | spa |
| Publicado: |
2018
|
| Materias: | |
| Acceso en línea: |
http://dspace.ups.edu.ec/handle/123456789/16053 |
| Etiquetas: |
Agregar Etiqueta
Sin Etiquetas, Sea el primero en etiquetar este registro!
|
| Sumario: |
This investigation was carried out to try
to reduce and give good use to the slag
produced by the retread processing of
tires, said slag was used in the production
of vehicular cobblestones. The main
objective is to perform an analysis of the
mechanical properties such as
compressive strength and resistance to
abrasion wear, to determine if it can be
used in construction and thus ensure its
commercialization and distribution.
The dosage of a conventional paver of
35MPa was proposed, at said dosage a
percentage of fine aggregate was
removed to be replaced by rubber
particles.
Several samples were made with
different percentages of slag, the
percentages tested are 20%, 12%, 10%,
5% and 3%. Obtaining as an optimal
value 12% of rubber particles, with a
compressive strength of 36MPa and in
the abrasion wear resistance test, a value
of 25mm complying with the established
INEN norm. |
|---|